Samsung AM JXVHGH Series Installation Manual page 23

Moving the outdoor unit
f Select the moving path in advance . X
f Be sure that moving path can support weight of the outdoor unit .
X
f Do not slant the product more than 30˚ when carrying it . (Do not lay the product down in sideways .)
X
f Surface of the heat exchanger is sharp . Be careful not to get injured while moving the product . X
• You must use certain part of the product when moving the product .
CAUTION
When moving with a crane
f Fasten the wire rope as shown in the figure . X
f To protect damage or scratches, insert a piece of cloth between the
X
outdoor unit and the wire rope .
When moving with a forklift
f Carefully insert the forklift forks into the forklift holes at the bottom X
of the outdoor unit .
f Be careful with the forklift from damaging the product .
X
When moving the product without wooden pallet and the crane is not available for use
f Connect a wire rope to the outdoor unit as you would move it with X
a crane .
f Hang the wire rope to the forklift fork to move the outdoor unit . X
DVM S HE_IM_DB68-05461A-08_EN.indd 23
Wire rope
Holes for wire rope
to go through
Forklift
Holes for forklift
forks to go
through
Forklift
Wire rope
Forklift holes
23
2017-03-24 오후 1:38:16