Programming - Mitsubishi Electric Melsec QJ71LP21 Reference Manual

7 APPLICATION FUNCTIONS

7.4.5 Programming

7 - 30
This section describes the formats of dedicated instructions available for network
modules and program examples.
POINT
The descriptions in this section are based on the MELSECNET/H specifications.
For access to CC-Link IE Controller Network or CC-Link IE Field Network, refer to
the manual for the network module used.
1) Instruction execution in transient transmission
To perform the following processing in transient transmission, provide
interlocks:
Using the same channel with multiple instructions
(Refer to Example 1.)
Executing instructions from a redundant system
(Refer to Example 2.)
MELSEC-Q
7 - 30