ABB i-bus EIB Product Manual page 29

®
ABB i-bus EIB / KNX
© 2004 ABB STOTZ-KONTAKT GmbH
Project design and programming
Parameter: "Reset of staircase time after end of permanent ON"
This parameter defines how the output is set on receipt of the telegram value
"0" at the object "Permanent ON". The output can switch off immediately
("no") or remain switched on for the duration of the staircase lighting time.
Parameter: "Warning before end of staircase lighting"
The user can be warned before the staircase lighting time elapses for the
duration of the "Warning time". The warning time is contained in the
staircase lighting time.
There are two possibilities for issuing a warning: The first one involves
setting the object "Warning stairc. lighting" to "1". The other option switches
the output off and on again very briefly. Both possibilities can be set together
or separately.
Parameter: "Warning time"
The above warning time is set in this parameter.
Parameter: "Duration of staircase lighting can be changed by object"
The object "Duration of staircase lighting" is enabled via this parameter. It
enables the staircase lighting time to be modified via the bus.
Parameter: "After supply voltage recovery, the staircase light is"
It can be set here whether the staircase lighting is "switched on" or "switched
off" on recovery of the bus voltage or the supply voltage of the Room
Controller. If the option "switched on" is selected, the staircase lighting time
restarts after bus voltage recovery.
Selection "ON/OFF delay"
It is possible to define in this parameter window whether the output switches
on or off with a delay.
Parameter: "Switch ON delay"
This parameter sets the delay for switching on the output after an ON
command.
Parameter: "Switch OFF delay"
This parameter sets the delay for switching off the output after an OFF
command.
29