ABB i-bus EIB Product Manual page 17

®
ABB i-bus EIB / KNX
© 2004 ABB STOTZ-KONTAKT GmbH
Application and planning
Threshold values are not hysteresis values
Object "Threshold value"
Upper threshold value
Lower threshold value
Output
When the value exceeds or falls below any threshold value, the output is
switched.
Note: If the object "Threshold value" receives a value which does not
exceed or fall below any of the threshold values compared to
the old value, no switching operations are triggered.
ON OFF ON
OFF
OFF
ON
OFF
ON OFF
17