Checking The Rear-Roller Scraper Wire Tension; Cleaning; Washing The Machine - Toro LT-F3000 Operator's Manual

Figure 68
1. Nut
Checking the Rear-Roller
Scraper Wire Tension
Service Interval: Every 50 hours
Ensure that the scraper wires are correctly tensioned
for maximum working life.
1. Carefully tighten the scraper wire retaining nuts
to remove any slack from the scraper wires.
2. Tighten the nuts 4 full turns to correctly tension
the wire (Figure 69).
Figure 69
1. Scraper wire retaining nuts
Note:
Do not overtighten the scraper wires.

Cleaning

Washing the Machine

Wash the machine as needed using water alone
or with a mild detergent. You may use a rag when
washing the machine.
Important:
Do not use brackish or reclaimed
g014441
water to clean the machine.
Important:
Do not use power-washing equipment
to wash the machine. Power-washing equipment
may damage the electrical system, loosen
important decals, or wash away necessary grease
at friction points. Avoid excessive use of water
near the control panel, engine, and battery.
Important:
Do not wash the machine with the
engine running. Washing the machine with the
engine running may result in internal engine
damage.
g014440
52