Toro LT-F3000 Operator's Manual page 17

Key Switch
0 = Engine off
I = Engine run/Auxiliary on
II = Engine pre-heat
III = Engine start
Figure 21
1. Key switch
Engine Pre-Heat Indicator Light
Turn the key to position II. The engine preheat
indicator light will illuminate and heat the glow plugs
(Figure 22).
Important:
Attempting to start a cold engine
before the pre-heat is used can cause unnecessary
wear to the battery.
Figure 22
1. Engine pre-heat indicator light
Fuel Gauge
The fuel gauge shows the amount of fuel in the tank
(Figure 23).
g014556
Hour Meter
The hour meter shows the total hours that the machine
has been operated
1. Hour meter
Transmission-Neutral-Indicator
Light
This light illuminates when the travel-control pedal is
g034893
in the N
EUTRAL
to position I (Figure
Note:
The parking brake must be engaged for the
transmission neutral indicator light to illuminate.
17
Figure 23
(Figure 24).
Figure 24
position and the ignition key is turned
25).
g014558
g014559