Toro LT-F3000 Operator's Manual page 16

Warning Systems
Engine-Coolant-Temperature-Warning Light
The engine-coolant-temperature-warning light
illuminates, the horn is actuated, and the cutting units
stop when the engine becomes too hot
Figure 16
1. Engine-coolant-temperature-warning light
Note:
The flail rotors disengage when the operating
temperature reaches 115°C (239°F).
Hydraulic-Fluid-Temperature-Warning Light
The hydraulic-fluid-temperature-warning light
illuminates when overheating occurs and the horn
is actuated when the hydraulic fluid in the reservoir
exceeds 95°C (203°F); refer to
Figure 17
1. Hydraulic-fluid-temperature-warning light
(Figure 16).
g034886
Figure 17.
g034897
Battery-Charge-Warning Light
The battery-charge-warning light illuminates when the
battery is low of charge
1. Battery-charge-warning light
Engine-Oil-Pressure-Warning Light
The engine-oil-pressure-warning light illuminates
when the oil pressure is too low
1. Engine-oil-pressure-warning light
Audible Warning Horn
Service Interval: Before each use or daily—Check
the horn.
Press the horn button to provide an audible warning
(Figure 20).
Important:
The horn is automatically actuated
when an engine coolant or hydraulic fluid overheat
condition occurs. Shut off the engine immediately
and fix the machine before starting it again.
1. Horn
16
(Figure 18).
Figure 18
(Figure 19).
Figure 19
Figure 20
g034887
g034898
g034888