Signals; Signals To Bag; Signals From Bag - Siemens SINUMERIK 840D sl Function Manual

R1: Referencing
15.12 Data lists
Number Identifier: $MA_
34080 REFP_MOVE_DIST
34090 REFP_MOVE_DIST_CORR
34092 REFP_CAM_SHIFT
34093 REFP_CAM_MARKER_DIST
34100 REFP_SET_POS
34102 REFP_SYNC_ENCS
34104 REFP_PERMITTED_IN_FOLLOWUP
34110 REFP_CYCLE_NR
34120 REFP_BERO_LOW_ACTIVE
34200 ENC_REFP_MODE
34210 ENC_REFP_STATE
34220 ENC_ABS_TURNS_MODULO
34230 ENC_SERIAL_NUMBER
34232 EVERY_ENC_SERIAL_NUMBER
34300 ENC_REFP_MARKER_DIST
34310 ENC_MARKER_INC
34320 ENC_INVERS
34330 REFP_STOP_AT_ABS_MARKER
35150 SPIND_DES_VELO_TOL
36302 ENC_FREQ_LIMIT_LOW
36310 ENC_ZERO_MONITORING
15.12.2

Signals

15.12.2.1

Signals to BAG

Signal name
Mode group RESET
Machine function REF
15.12.2.2

Signals from BAG

Signal name
Active machine function REF
1196
Description
Reference point distance/destination point for distance‐
coded system
Reference point/absolute offset, distancecoded
Electronic reference cam shift for incremental meas‐
urement systems with equidistant zero marks.
Reference cam/reference mark distance
Reference point value
Actual value adjustment to the referencing measure‐
ment system
Enable referencing in followup mode
Axis sequence for channelspecific Homing
Polarity change of the BERO cam
Referencing mode
Status of absolute encoder
Absolute encoder range for rotary encoders
Encoder serial number
Expansion of encoder serial number
Basic distance of reference marks for distance-coded
encoders
Interval between two reference marks with distanceco‐
ded scales
Linear measuring system inverse to machine system:
Distancecoded linear measuring system without desti‐
nation point
Spindle speed tolerance
Encoder limit frequency resynchronization
Zero mark monitoring
SINUMERIK 840D sl
DB11.DBX0.7
DB11.DBX1.2
SINUMERIK 840D sl
DB11.DBX5.2
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
SINUMERIK 828D
DB3000.DBX0.7
DB3000.DBX1.2
SINUMERIK 828D
DB3100.DBX1.2
Basic Functions