Overview Of The Nc/Plc Interface Signals Of Ht 8 - Siemens SINUMERIK 840D sl Function Manual

P3: Basic PLC program for SINUMERIK 840D sl
13.17 Block descriptions
Source: MCP
Traversing key +
Traversing key -
Rapid traverse override
Override
Source: MCP
Feed override
Source: MCP
Feed override
Channel signals
Source: MCP
NC start
NC stop
RESET
Single BLock
13.17.28.2

Overview of the NC/PLC interface signals of HT 8

Operating modes and machine functions
Destination: MCP
AUTOMATIC
MDI
JOG
REPOS
REF
TEACH IN
1058
Destination: Prog. axes corresponding to the table in DB10,
DBB8 - 13 (1. MCP) or DBB32 - 37 (2. MCP)
DB31, ... .DBX4.7
DB31, ... .DBX4.6
DB31, ... .DBX4.5
Destination: Programmed channel (Parameter: ChanNo)
DB21, ... .DBB4
Destination: Prog. axes corresponding to the table in DB10,
DBB8 - 13 (1. MCP) or DBB32 - 37 (2. MCP)
DB31, ... .DBB0
Destination: Programmed channel (Parameter: ChanNo)
DB21, ... .DBX7.1
DB21, ... .DBX7.3
DB21, ... .DBX7.7
DB21, ... .DBX0.4
Source: Interface-DB (parameter BAGNo)
Display for BAG 1
DB11.DBX6.0
DB11.DBX6.1
DB11.DBX6.2
DB11.DBX7.1
DB11.DBX7.2
DB11.DBX7.0
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions