Philips M3150B Installation And Service Manual page 81

Information center system

Table of Contents

For Single Display systems, the Main Display is plugged into the 9-pin Main Display

connector on the rear of the PC.

For Dual Display systems, a Dual Video Card and Y-Cable are required. The Y-Cable plugs

into the 9-pin Display connector on the Dual Video Card. The Main Display then plugs into the

Y-Cable connector labeled 1 and the Second Display plugs into the Y-Cable connector labeled

2. The rear panel Main Display connector is not used.

Cables with plugs not firmly attached by screw connections must be secured to prevent

accidental unplugging. Make certain that the speaker cable cannot accidentally be pulled

out because it annunciates alarms. Use the Strain Relief Kit (M3150-60019) provided and

secure the speaker cable to another cable that is secured with a screw connection. When

securing all cables, be sure to provide strain relief loops and cinch cable ties securely. See

Figure 2-45 on page 2-47.

Hospital LAN NIC Card (Optional)

(Dual Display)

Clinical Network

Main Display

(Single Display)

Figure 2-5 Plug Connections for D510 Information Center Systems

To Dual Video

Card Connector

System Components

Recorder Rack

(2) To Second Display

(1) To Main Display

Hardware Description

Troubleshooting