Table of Contents
Advertisement
Printing Test tests LaserJet printers.
Note
Troubleshooting printer problems is described in the HP LaserJet Quick Reference Service
Guide included on the Information Center Documentation CDROM.
NT Diagnostics
NT Diagnostics provides access to tools that help determining status and diagnostic
information about the Windows Operating System, hardware, drivers, and BIOS. They are
available for both Information Centers and Clients and for the Server. These tools are
accessed from the Diagnostics application of the Service menu.
Note that Diagnostics tools can run on the Server while the Network is in Monitoring
Mode.
More detailed descriptions of these tools are provided in Windows Help windows accessed
by clicking on Help in the menu bar of each application.
Note
Windows Help windows often cover part of patient waveforms. However, they do not effect
Philips system monitoring or alarms. To see patient data, resize and move the Help window
to the lower half of the display screen.
Performance
Performance Monitor is a graphical tool for measuring the performance of the computers on
Monitor
the network.
!Windows
!Windows Explorer is the standard Window tool for organizing and managing files and
Explorer
directories.
!MSDOS
!MS DOS Command Prompt is a character-based interface to Windows and its
Command Prompt
subsystems.
Backup Error
Backup Error Logs copies all Event Logs and Information Center logs from selected host
Logs
names to a compressed file on a floppy disk or hard drive.The logs are copied and
compressed for one Information Center, Client or Database Server at a time.
Redirect HL7
The Redirect HL7 allows for easier troubleshooting of HL7 data export problems. This
diagnostic tool redirects the HL7 target system output data configured for one target system
to a different host system and allows the Client.exe tool to run on the Database Server. The
original target system will not receive the HL7 data while this tool is running.
Start initiates the test and sends a print test page to the default printer set in Print
Manager.
Stop terminates a test in process.
Status from last job indicates the status of the test (e.g. active, done, error).
Maintenance, Troubleshooting, and Repair
Troubleshooting
7-63
Advertisement
Table of Contents
Troubleshooting
