Table of Contents
Advertisement
Troubleshooting
Step 1. Click on Control Panel in the Other Services menu of Service to bring up the
Step 2. Double click on the Add Printer icon in the Printers window of Figure 7-64 and
Step 3. Sequence through the Add Printer Wizard dialog boxes using the Next button to
Step 4. In the Local or Network Printer window, select Local Printer attached to this
Step 5. In Select a Printer Port window:
Step 6. When the Add Standard TCP/IP Printer Port Wizard is up, click Next to Add Port
Step 7. In the Additional Port Information Required window, select Hewlett Packard Jet
Step 8. Review the port created and click Finish. The Install Printer Software window
Note
At present, the HP LaserJet 5P driver is the proper choice for configuring an HP LaserJet 6P
and 2200 printer to the Philips system.
Step 9. In the Use Existing Driver window, select Keep existing driver (recommended).
Step 10. In the Name Your Printer window,
7-138
Maintenance, Troubleshooting, and Repair
Printers window of Figure 7-64.
Figure 7-64 Printers Configuration Window
the Add Printer Wizard window appears.
advance to the next box. The following entries should be made to add LaserJet printer
icons.
computer. Do not check Automatically detect and install my Plug and Play printer.
Leave this disabled.
•
For a local printer, click Use the following port and accept the recommended (LPT1
and skip to Install Printer Software Window in step ). Click Next.
•
For a network printer, click Create a new port and select Standard TCP/IP Port
option in Type of port field. Click Next.
window. Enter 172.31.254.1 in the Printer Name of IP Address field. The Port Name
field is automatically filled in. Click Next.
Direct.
opens. Select HP as the manufacturer, and the HP LaserJet 5P as the printer. Click
Next.
Printer name:
Advertisement
Table of Contents
Troubleshooting
