Table of Contents
Advertisement
Troubleshooting
Step 5. Verify (or enter) the following information in the fields of the UPS configuration
Step 6. When the UPS configuration settings have been verified, click OK to return to the
7-114
Maintenance, Troubleshooting, and Repair
Figure 7-63 UPS Configuration Window
window.
Uninterruptible Power Supply is installed on: COM1:
UPS Configuration
Power failure signal
Low battery signal at least
2 minutes before shutdown (Disabled)
Remote UPS Shutdown
Execute Command File (Disabled)
UPS Characteristics
Expected battery Life:
Battery Recharge time
per minute of run time:
UPS Service
Time between power failure
and initial warning message: 120 sec.
Delay between warning
messages:
Windows Main Menu.
UPS Interface Voltages:
2 min.
1 min.
120 sec.
Positive
Positive
Advertisement
Table of Contents
Troubleshooting
