Mitsubishi Electric MELSERVO J5 Series User Manual page 38

With push buttons [A]
In the clear mode, the one-touch tuning result can be rewritten to the factory setting of servo parameter. In the back mode,
the one-touch tuning result can be returned to the value before one-touch tuning. The setting value of the returned servo
parameter is stored in the non-volatile memory.
1.
Switch to the initial display "AUTO" of the one-touch tuning with the "MODE".
2.
Select the clear mode or back mode with the "UP" or "DOWN".
Select clear mode for initialization of one-touch tuning
UP
One-touch tuning clear mode is displayed (for initialization)
Initial screen
3 ADJUSTMENT METHOD
36
3.2 One-touch tuning
Auto mode
Clear mode
DOWN
Back mode
To clear the adjustment results of the one-touch tuning, push the "SET" button.
The one-touch tuning clear mode is in progress. The clear mode symbol blinks for 3 s.
Once the initialization is complete, the initial screen will be displayed.