Tot [On/Off, 1-255]; Tx [Xxxx] - GE MDS 4790 Series Installation & Operation Manual

Transmit Timeout-
Timer
Transmit Frequency
58
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8457-MDS-UP-9790X.aspx
Enter the command without any parameters to display the time. Enter
the command in the following format to reset the time:
TIME hh:mm:ss
where hh is a two-digit number from 00-23 representing the hour (
12:00 am; is 12:00 pm; and
12
from 00 to 59 representing the minute, and ss is a two-digit number from
00 to 59 representing the second.

TOT [ON/OFF, 1-255]

The Transmit Timeout Timer limits the time a radio can remain contin-
uously keyed. If a radio remains keyed for longer than the timer dura-
tion, the transmitter automatically de-keys. The radio must transition to
the de-keyed state before accepting a new keying request.
The command entered without a parameter displays the timer value
TOT
in seconds.
To enable the timer, enter
The default is .
TOT ON
To set the timer value, enter the
ranging from 1 to 255 (seconds). The default is 30 seconds.

TX [xxxx]

A
B
This command displays or changes the radio's transmit frequency. Nor-
mally, the radio ships to the customer programmed with the cus-
tomer-specified frequency. If you did not specify the operating
frequency when the radio was ordered, the TX frequency is set to the
center of the radio's operating band (see
Codes, beginning on Page 6
If the transmit frequency is changed more than 100 kHz from the fac-
tory's setting, review the duplexer guidelines in
Frequency Change Considerations, beginning on Page
MDS 4790/9790 Series I/O Guide
is 11:00 pm), mm is a two-digit number
23
Transmit Timeout
A
B
Page 71
Transmit Timeout Duration
A
screen,
B
. To disable the timer, enter
TOT ON
command followed by a parameter
TOT
Transmit Frequency
Page 68
Section 2.6, Model Number
for the model's operating band).
Section 8.4, Operating
MDS 05-3438A01, Rev. F
is
00
screen,
Page 71
.
TOT OFF
screen,
89.