GE MDS 4790 Series Installation & Operation Manual page 42

34
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8457-MDS-UP-9790X.aspx
Table 7. PC Commands—Radio Operation
TERMINAL
COMMAND PANEL MENU
BATT(ery) [ON/OFF] Battery Backup
Details, page 41 Details, page 73
BAUD [xxxxx abc] Baud Rate/Format
Details, page 42 Details, page 70
BUFF [ON/OFF] Data Buffering
Details, page 42 Details, page 74
CKEY [ON/OFF] Continuous Keying
Details, page 43 Details, page 72
CTS [0-255] Clear-to-Send Delay
Details, page 43 Details, page 70
DATAKEY [ON/OFF] Key On Data
Details, page 44 Details, page 73
DATE [mmm dd yyyy] Set Date
Details, page 44 Details, page 77
DMGAP [xx] None
Details, page 45
EMP [ON/OFF] Emphasis
Details, page 46 Details, page 70
INIT None
Details, page 46
MODEM Modem
[NONE/4800/9600/1920 Details, page 69
0/DEFAULT]
Details, page 48
PTT [0-255] Push-to-Talk Delay
Details, page 50 Details, page 70
PWR [20–37] Output Power Setting
Details, page 51 [37-20]
Details, page 69
RADIO [AUTO/A/B] Radio Selection
Details, page 51 Details, page 78
REPEATER [ON/OFF] Repeater Mode
Details, page 51 Details, page 71
RXMUTE RX Mute Mode
[ON/OFF/Time in msec] Details, page 72
Details, page 53
MDS 4790/9790 Series I/O Guide
FRONT
DESCRIPTION
Enable or disable alarms derived from monitor-
ing the internal back-up battery.
Set or display communication attributes for the
data interface port
xxxxx=Baud rate (110, 300, 1200, 2400, 4800,
9600, 19200, 38400)
a=7 or 8 data bits
b=N for none, O for odd, E for even parity
c=1 or 2 stop bits
Enable or disable received data buffering
ON=Seamless data
OFF=Fast byte throughput
Enable or disable continuous keying
ON=Continuous keying enabled
OFF=Continuous keying disabled
Set or display CTS delay. Setting a value of 0
keeps CTS normally asserted.
Toggle between key-on-data and key-on-RTS
ON=Key-on data
OFF=Key-on RTS
Set or display the current date
Set the amount of time to wait after receiving a
character before interpreting the next received
character as the start of a new message
Enable or disable pre-emphasis and
de-emphasis
Set all operating parameters to default settings
Set or display the radio's modem type, or spec-
ify analog input
Set or display PTT delay
Set or display forward power output setting
Set or display the active transceiver board
Enable or disable repeater mode
Set or display RX (receive) Muting status
MDS 05-3438A01, Rev. F