Tie down all control wires to the designated control cable routing as shown in the picture. Remember to connect the shields in a proper way to ensure optimum

electrical immunity.

Field Installed Network Module options connection

Connections are made to the network options on the control card. For details see the relevant network instructions. The cable must be placed to the left inside

the frequency converter and tied down together with other control wires (see picture).

Control card wiring path for the 43. Control card wiring for the 41, 42, 44, 51

and 52 use the same path.

In the Chassis (IP00) and NEMA 1 units it is also possible to connect the network

from the top of the unit as shown on the picture to the right. On the NEMA 1

unit a cover plate must be removed.

142

Control card wiring path for the 61/63. Control card wiring for the 62/64 use

the same path.

Illustration 7.32: Top connection for network.

AF-650 GP Design Guide

Table of Contents