Samsung IPX-S300B System Description page 7

Ошибка! Используйте вкладку "Главная" для применения 제목 8 к тексту, который должен здесь отображаться.
Electrostatic Discharge (ESD) Warning
Observe the following guidelines to minimize the potential for Electrostatic Discharge
(ESD) damage, which can cause intermittent or complete component failures.
When handling IPX-S300B or its components, wear grounding wrist straps to
avoid ESD damage to the equipment. Do not directly touch the backplane with
your hand or any metal tool, or you could shock yourself.
Always use an ESD wrist strap or ankle strap, and verify that it is in direct contact with
your skin. Avoid contact between the component and your clothing as it causes ESD
damage.
When handling any component that is removed from the chassis, verify that the equipment
end of your ESD strap is attached to one of the ESD points on the chassis.
Use care when installing or uninstalling modules or interface cards. Tighten the captive
installation screws to ensure a proper connection when inserting modules or interface cards.
When removing or installing a component, always place it component-side up on an
antistatic surface, in an antistatic card rack. If you are returning a component, place it in an
electrostatic bag before packing it.
© SAMSUNG Electronics Co., Ltd.
page 7 of 162