Samsung IPX-S300B System Description page 66

Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться..
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться.
Therefore, the basic settings for using the VPU conference must be configured.

Barge-In with Tone
When you intrude into a call and establish a three-way conference, this service
periodically plays a tone to notify the user being intruded into that the call has been
intruded into.

Barge-In without Tone
When a three-way conference call is established by intruding into a call, the user being
intruded into is not given any notification and the intruding user's voice is muted so
that the call can be monitored in secret.
Change Password
The change password feature is used when the user wishes to change his/her password for
using function.
Call Forward
When there is an incoming call, this feature is used for forwarding the call to another
number specified by the user.

Call Forward All
If the call forward all feature is enabled for a user, all incoming calls for the user are
automatically forwarded to a specified number.
Even if the user has not enabled call forward all, the administrator can configure all
incoming calls for the user in specific time periods to be forwarded to another number.
For more information, see the 'System Call Forward-Group Call Forward' section of
'4. System Features.'

Call Forward Busy
If the call forward busy feature is enabled for a user, incoming calls for the user while
the user is busy are automatically forwarded to a specified number.
Even if the user has not enabled call forward busy, the administrator can configure the
incoming calls for the user while the user is busy to be forwarded to another number.
For more information, see the 'System Call Forward-Preset call forward Busy' section
of '4. System Features.'

Call Forward No Answer
If the call forward no answer feature is enabled for a user, the incoming calls for the
user which are not answered for a specified period of time are automatically forwarded
to a specified number.
Even if the user has not enabled call forward no answer, the administrator can
configure the incoming calls not answered by the user to be forwarded to another
number. For more information, see the 'System Call Forward-Preset call forward No
Answer' section of '4. System Features.'
You can use PWP to set the time period for each user which is used by the call forward
no answer service to determine the user's an incoming call as an unanswered call and
forward it to a specified number. If call forward no answer is enabled by pressing the
feature code on the phone, the default time of 15 seconds is used.
© SAMSUNG Electronics Co., Ltd.
page 66 of 162