Samsung IPX-S300B System Description page 118

No.
7 Connect Number
8 Connect Name
9 Billed Number
Usage (Time)
10 Attempt Time
11 Call Duration
12 Answer Time
13 Disconnect Time
Calling Information in the IPX-S300B
14 Calling Type
15 Calling IP
16 Calling User Group
17 Incoming Route
Called Information in the IPX-S300B
18 Called Type
19 Called IP
20 Called User Group
21 Outgoing Route
Disconnect Reason
22 SIP Status Code
23 Q850 Release Cause
24 Internal Fail Code
System Node Information (optional-only used in Active-Active Mode)
25 System Node ID
26 Inter-Node Data
27 GMT Offset
© SAMSUNG Electronics Co., Ltd.
Parameter
The last number used to be connected to receiving
The last name used to be connected to sending
Bill Number (User's accounting code)
Time when the call is attempted
Call Duration Time (Disconnect Time-Answer Time)
Time when the call is connected
Call End Time
Caller Type
- 0: Unknown
- 1: User
- 2: Service
- 3: Trunk (End Point Type)
- 4: Application Server Type
Calling IP Address
User Group to which the caller belongs
Incoming Route Number
Called Type
- 0: Unknown
- 1: User
- 2: Service
- 3: Trunk (End Point Type)
- 4: Application Server Type
Called IP Address
User Group the called belongs
Outgoing Route Number
SIP Status Code
Q850 Release Cause
IPX-S300B Internal Fail Code
System Node ID
- 0: system node 0
- 1: system node 1
- 0: My Node's Data
- 1: Peer Node's Data
Peer Node's Data can be ignored
GMT offset Time
ANNEX B. CDR
Description
page 118 of 162