Mitsubishi Electric AE-200A Instruction Book page 32

Object
Interlocked Units Apportionment
Parameter
Night Purge State
Thermo On Off State
System Alarm Signal
Error Code Detail
External Heat Source State
PIcontroller Alarm Signal
Trend Log Room Temp
Trend Log Group Apportioned
Electric Energy
Trend Log Interlocked Units
Apportioned Electric Energy
Trend Log PIcontroller Electric
Energy 1–4
Trend Log Pulse Input Electric
Energy 1–4
Trend Log Group Apportionment
Parameter
Trend Log Interlocked Units
Apportionment Parameter
Notification Class
Device
* xx: Group number (01–50)
* mm: PI controller address (01–50)
* aa: Interlocked unit address (01–50)
*1 Air conditioning unit error code (4 digits) will be output to "MessageText".
*2 Error code (4 digits) will be output to "MessageText".
*3 PI controller error code (4 digits) will be output to "MessageText".
*4 Do not use this when "External Input Setting" for AE-200/AE-50/EW-50 is set to "ON/OFF (Level signal)". "External Input Setting" can
be configured on the Initial Setting Tool, Web Browser for Initial Settings, or AE-200/AE-50's LCD. (Refer to the AE-200/AE-50/EW-50
Instruction Book (Initial Settings) for settings methods.)
WT07919X04
Object ID Event Notification
AC_61aa44
BI_01xx46
BI_01xx47
BI_010048
AI_01xx49
BI_01xx50
BI_41mm03
LOG_01xx80
LOG_01xx83
LOG_61aa83
LOG_41mm84–87
LOG_410084–87
LOG_01xx88
LOG_61aa88
CLS_xxxxxx
DEV_xxxxxx
32
COV Notification
V —
V V
V V
V *2 V
— V
V V
V *3 V
— —
— —
— —
— —
— —
— —
— —
— —
— —
Remarks
xxxxxx: Notification
class ID
xxxxxx: Device No.