Mitsubishi Electric AE-200A Instruction Book page 13

Object type *1
File
Global Group
Group
Integer Value
Large Analog Value
Life Safety Point
Life Safety Zone
Load Control
Loop
Multi-state Input
Multi-state Output
Multi-state Value
Network Security
Notification Class
OctetString Value
Positive Integer
Value
Program
Pulse Converter
Schedule
Structured View
Time Pattern Value
Time Value
Trend Log
Trend Log Multiple
*1 Values within parentheses are "Object_Type" property values.
*2 Outputs an error code (4-digit) in Description and Message Text of event notification.
*3 Do not use this when "External Input Setting" for AE-200/AE-50/EW-50 is set to "ON/OFF (Level signal)". "External Input Setting" can
be configured on the Initial Setting Tool, Web Browser for Initial Settings, or AE-200/AE-50's LCD. (Refer to the AE-200/AE-50/EW-50
Instruction Book (Initial Settings) for settings methods.)
*4 Executes the stop command and remote controller operation prohibition (run/stop) command for air conditioning units.
WT07919X04
Supported/
Abbreviation
Not supported
(10) —
(26) —
(11) —
(45) —
(46) —
(21) —
(22) —
(28) —
(12) —
(13) MI
(14) MO
(19) —
(38) —
(15) CLS
(47) —
(48) —
(16) —
(24) —
(17) —
(29) —
(49) —
(50) —
(20) LOG
(27) —
—
—
—
—
—
—
—
—
—
Error Code
Operational Mode State
Fan Speed State
V
Air Direction State
Ventilation Mode State
Air To Water Mode State
Operational Mode Setup
Fan Speed Setup
V Air Direction Setup
Ventilation Mode Setup
Air To Water Mode Setup
—
—
V Notification Class
—
—
—
—
—
—
—
—
Trend Log Room Temp
Trend Log Group Apportioned Electric Energy
Trend Log Interlocked Units Apportioned Electric Energy
V Trend Log PIcontroller Electric Energy 1–4
Trend Log Pulse Input Electric Energy 1–4
Trend Log Group Apportionment parameter
Trend Log Interlocked Units Apportionment parameter
—
13
Object