Pwm Output Function - Mitsubishi Electric RD62P2E Application User's Manual

1.7

PWM Output Function

This function outputs the PWM waveform of up to 200kHz, 100ns as the minimum ON width (0.1s) from the PWM output
point No.1 terminal (EQU1) and PWM output point No.2 terminal (EQU2).
Buffer memory
CH1 PWM output cycle time setting
(Un\G256 to Un\G257)
CH1 PWM output ON time setting 1
(Un\G258 to Un\G259)
CH1 PWM output ON time setting 2
(Un\G260 to Un\G261)
Output signal
CH1 PWM output start command
(PWM output) (Y6)
Setting method of the PWM output function
To use the pulse measurement function, select "PWM output mode" for "Counter operation mode" in the parameter settings.
Navigation window  [Parameter]  [Module Information]  Module model name  [Module Parameter]  [Basic
setting]
PWM output terminal
The PWM output waveform is output from the following terminals.
• PWM output point No.1 terminal (EQU1)
• PWM output point No.2 terminal (EQU2)
1 FUNCTIONS
36
1.7 PWM Output Function
High-speed
counter module
Pulse output
PWM output
function
Pulse output
Coincidence output point No.1 terminal (EQU1)
Coincidence output point No.2 terminal (EQU2)