Refresh Setting - Mitsubishi Electric RD62P2E Application User's Manual

2.5

Refresh Setting

Set the transfer destination of the settings in the buffer memory of the high-speed counter module such as module labels and
devices of the CPU module. By configuring the refresh setting, the reading from the program is not required.
Select one of the following transfer destinations in "Target".
• Module Label (Page 43 Module Label)
• Refresh Data Register (Page 43 Refresh data register (RD))
• Device (Page 43 Specified device)
Module Label
The settings of the buffer memory are transferred to the module label corresponding to each buffer memory area. When
"Present value" of the channel transferred to the module label is set to "Enable", all the items of the set channel are set to
"Enable".
Refresh data register (RD)
The settings of the buffer memory are transferred to the refresh data register (RD) of the CPU module. The transfer
destinations of all items are automatically set by setting the start device to "Top Device Name".
Specified device
The settings of the buffer memory are transferred to the specified device of the CPU module. The device X, Y, M, L, B, D, W,
R, ZR, and RD can be specified. When the bit device X, Y, M, L, or B is used, set a number that can be divided by 16 points
(example: X10, Y120, and M16). Also, the buffer memory data is stored in the devices for 16 points starting from the set
device number.
Ex.
When X10 is set, the data is stored in X10 to X1F.
2 PARAMETER SETTINGS
2.5 Refresh Setting
2
43