Newly Creating The Protocol Setting Data - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

■Newly creating the protocol setting data

Newly create the protocol setting data.
[File]  [New]
Item
Protocol No.
Manufacturer
Model
Protocol Name
Communication Type
Send/Receive
Packet Name
Packet Setting
1 FUNCTIONS
34
1.3 Communications Using the Predefined Protocol
Description
Displays the protocol number used with the dedicated instruction in the program.
Displays the name of the manufacturer of the device for which the protocol is being set.
Displays the model of the protocol to be set.
Displays the name of the protocol to be set.
Displays the communication type of the protocol to be set.
Send only: Sends one send packet once.
Receive only: If there is a matching packet within up to 16 registered and received packets, it is received.
Send & receive: After sending one send packet, if there is a matching packet within up to 16 registered and received
packets, it is received.
Displays the packet send direction.
: For send
(1) to (16): For receive, the received packet number is displayed in parentheses.
Displays the packet name.
Displays the validity of variables in the packet elements and the variable setting state.
If the variable is not set, there are no elements, or there is an element error, the protocol is not written to the Ethernet-
equipped module.
No Variable: When there is no variable in the elements
Variable Set: Only when all variables have been set
Variable Unset: When there is even one unset variable
Element Unset: When there are no elements in an editable protocol
Element error: When elements do not satisfy requirements