Module Operation Mode - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

Module Operation Mode

Set the module operation mode.
Set the same operation mode for both of the P1 connector and P2 connector.
For a redundant system, select the module operation mode of system A.
For details on module communication test mode, refer to the following.
Page 284 Module communication test
Item
Module Operation Mode
When different operation modes are set for the P1 connector and P2 connector, the Ethernet-equipped module operates with
the following operation modes.
Module Operation Mode
P1 connector
Online
Offline
Module Communication Test
Description
Online
• Normal operation mode
Offline
• Communication with other stations and dedicated instruction cannot
be performed in this mode. Select this mode to debug the program
while the network is not yet connected.
Module Communication Test
• A mode for operating the module communication test. Select this
mode to check the operation when the module is in abnormal
condition.
P2 connector
Offline
Module Communication Test
Online
Module Communication Test
Online
Offline
Setting range
• Online
• Offline
• Module Communication Test
(Default: Online)
Operation mode of Ethernet-equipped
module
Offline
Module Communication Test
Offline
Module Communication Test
Module Communication Test
2 PARAMETER SETTINGS
2.3 Application Settings
2
275