ABB TPS48-H33 Operation Manual page 90

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
9 Dismantling and fitting
Identification of the assembly devices
Not all assembly devices are marked with a part number. Identification is guaranteed by the
tool list. This list is enclosed in the toolbox.
Servicing the assembly devices
Assembly devices must be checked for damage before and after use.
Visually inspect for corrosion, cracks, deformation and wear.

WARNING
Damaged assembly devices must no longer be used and must be re-

placed.
Tightening torques for assembly devices
Unless described otherwise, the screws and nuts of the assembly devices supplied by ABB
Turbo Systems must be tightened so they rest firmly against the surface.
Suspended loads
Loads that are not attached according to regulations can cause injury to per-
sonnel or fatal accidents.
WARNING
Only fasten the turbocharger, assemblies or individual parts on properly

functional lifting gear with sufficient load limit.
Pay attention to the correct attachment of loads on the crane hook.

People must not stand under suspended loads.

Wear safety gloves to protect against mechanical hazards.
Wear safety helmet.
Definition of terms
 Suspension point
Defined loading point on a component or an assembly (blind hole thread, eyelet, lug).
 Assembly device
Devices that are fitted on the turbocharger in order to obtain a suspension point. Assembly
devices are specially constructed and designed for the defined use; they are not trading
goods. Use assembly devices only for the described applications.
 Lifting gear
Equipment for the lifting and transporting of loads (ropes, chain block, crane). Lifting gear
is not supplied by ABB Turbo Systems.
© Copyright 2016 ABB. All rights reserved. HZTL4037_EN
Page 60 / 99
Revision A August 2016