Removing And Installing; Turbocharger Weight And Transportation; Table 2 Weight Of The Turbocharger; Table 3 Swivel Lifting Eye (S) To Be Used - ABB TPS48-H33 Operation Manual

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
2

Removing and Installing

2 Removing and Installing
2.1

Turbocharger weight and transportation

Lifting gear with a sufficient load limit must be used for removing and installing the turbo-
charger. The following weight specification applies to the heaviest variant possible. Depending
on the specification, the weight specified on the rating plate may be lower than the standard
value specified here.
Product
TPS44
TPS48
TPS52
Table 2: Weight of the turbocharger
One swivel lifting eye (S) is required to safely lift this turbocharger. This is not included in the
ABB Turbo Systems scope of delivery.
Swivel lifting eye (S) to be used
Table 3: Swivel lifting eye (S) to be used
Figure 4: Turbocharger transport
© Copyright 2016 ABB. All rights reserved.
Product Thread
TPS44 M8
TPS48 M8
TPS52 M10
HZTL4037_EN
Page 11 / 99
Weights [kg]
120
180
250
Length Minimum load
limit [kg]
L [mm]
13 125
13 190
18 260
Revision A August 2016