Table 12 Dimensions Of The Cleaning - ABB TPS48-H33 Operation Manual

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
7 Periodic maintenance work
7.2.7 Cleaning the cartridge group on turbine end
Soaking the contamination
Baked layers of contamination from fuel residue or coked oil may occur at the turbine end. The
contamination can be removed by soaking and brushing. The procedure for soaking the layers
of contamination as well as for cleaning the turbine are described in the following.
Figure 16: Soaking contamination of the turbine
Product
TPS44
TPS48
TPS52
Table 12: Dimensions of the cleaning container
To soak the layers of dirt on the turbine, the cartridge group can be immersed vertically in a
container (02) with fluid.
Set the container (02) inside a larger container (03) so that the overflowing fluid can be

collected.
Selection of the cleaning agent
Cleaning agents which contain chlorine attack metals.
Use only pH-neutral cleaning agents which do not attack metals.

CAUTION
Observe safety data sheet.

Fill the container (02) with soaking fluid.

© Copyright 2016 ABB. All rights reserved.
A [mm]
115
115
135
HZTL4037_EN
B [mm]
20
29
35
Revision A
Page 47 / 99
C [mm]
155
180
215
August 2016