Warning Plates On The Turbocharger - ABB TPS48-H33 Operation Manual

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
1 Introduction
1.5

Warning plates on the turbocharger

Warning plates are attached at the following locations:
Figure 2: Warning plates on the turbocharger
Turbochargers supplied to the enginebuilder without insulation must be equipped later with
warning plates on the insulation. This is the responsibility of the enginebuilder.
If warning plates are not present in the designated locations or not readable, proceed as fol-
lows:
Order new warning plates (72080) from ABB Turbocharging Service Stations (see chapter

Ordering spare parts [➙ 93]).
Remove any warning plates that have become unreadable.

Clean and degrease the areas designated for the warning plates.

Fit new warning plates and remove protective sheets.

© Copyright 2016 ABB. All rights reserved. HZTL4037_EN
Page 8 / 99
Revision A August 2016