Installing Air Inlets; Table 40 Tightening Torque (72020) - ABB TPS48-H33 Operation Manual

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
9 Dismantling and fitting
9.18

Installing air inlets

Figure 38: Installing the air inlets
Part number
72020
Table 40: Tightening torque (72020)
1. Fit the new O-ring (81010 / 82010) to the filter silencer (81000) or the air suction
branch (82000).
2. Manually position the filter silencer (81000) or the air suction branch (82000) on the com-
pressor casing (72000).
3. Fit the V-clamp (72020).
4. Align the casing position of the filter silencer (81000) or the air suction branch (82000) to
the marking.
5. Tighten the V-clamp (72020).
© Copyright 2016 ABB. All rights reserved.
TPS44
M10
30 Nm
HZTL4037_EN
TPS48
M10
30 Nm
Revision A
Page 82 / 99
TPS52
M10
30 Nm
August 2016