Table 4 Requirements For Threaded Rods - ABB TPS48-H33 Operation Manual

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
2 Removing and Installing
2.3.2 Fitting threaded rods
Figure 7: Inserting threaded rods into the bracket
1. Lightly oil the surfaces of the threaded rods (02) to be screwed in.
2. Screw the threaded rods into the bracket with the aid of locknuts (01).
3. Remove nuts (01) again.
Requirements for the threaded rods (02)
Figure 8: Requirements for threaded rods
Product Diameter
Threaded rod
[mm]
TPS44 Ø 16 / M16
TPS48 Ø 16 / M16
TPS52 Ø 20 / M20
Table 4: Requirements for threaded rods
Fastening material scope of delivery
The threaded rods and nuts for fastening the turbocharger on the bracket are not included in
the ABB Turbo Systems scope of delivery. These parts depend on the version of the engine-
side bracket.
© Copyright 2016 ABB. All rights reserved.
Material
DIN / ISO 898
(Part 1)
10.9 / 12.9
10.9 / 12.9
10.9 / 12.9
HZTL4037_EN
Thread length Length of threaded
L1 [mm]
≥ 30
≥ 30
≥ 30
Revision A
Page 15 / 99
rod
L2 [mm]
150
170
195
August 2016