Creating A Project; Connecting To Personal Computer - Mitsubishi Electric MELSEC iQ-R Series User Manual

6.6

Creating a Project

Create a project by starting CW Configurator.
[Project]  [New]
Creation procedure
6.7

Connecting to Personal Computer

This section shows the procedure to have direct connection between a personal computer and a C Controller module.
Connection procedure
Ethernet
6 PROCEDURE BEFORE OPERATION
44
6.6 Creating a Project
1.
Select the C Controller module to be used in the "New"
screen, and click the [OK] button.
1.
Connect a personal computer with a C Controller
module using an Ethernet cable.
2.
Select [Online]  [Current Connection Destination] from
the menu of CW Configurator.
3.
In the "Specify Connection Destination" screen, click the
[CPU Module Direct Coupled Setting] button (1).
4.
Select the connection method to the C Controller
module, and click the [Yes] button.
(1)
(2)
5.
Click the [Communication Test] button (2) in the "Specify
Connection Destination" screen to check the connection
to the C Controller module is available.