4.3
USB Connector
This section shows the specification of a usable USB cable and its wiring.
USB cable
Use a USB cable supplied with a USB Mass Storage Class-compliant device.
The type of cable connector connectable with the USB connector is type A.
Preventing USB cable from falling out
Connected USB cable can be fixed to the hole for fixing band of the module by using a fixing band (recommended
specification: width: 6 to 9 mm, thickness: 1 mm or less).
4 WIRING
26
4.3 USB Connector
(1)
(2)
(3)
1.
A through hole for a fixing band (1) is situated on the
bottom of a C Controller module.
2.
Pass the fixing band (2) through the hole.
3.
Pass the USB cable (3) through the fixing band to fix.