Checking Operations With The Dot Matrix Led And Lamps - Mitsubishi Electric MELSEC iQ-R Series User Manual

Checking operations with the dot matrix LED and lamps

The dot matrix LED on the front of the C Controller module and output lamps operate as follows:
1.
The display of the dot matrix LED on the front of the C Controller module switches alternately ten times.
2.
Synchronizing with the dot matrix LED, the output lamps Y10 and Y11 alternately turn ON.
3.
To check the operations again, reset the C Controller module.
8 OPERATION EXAMPLE
100
8.4 Checking Operations
Y10
Alternately Alternately Alternately
turns ON. turns ON. turns ON.
Y11