Figure 3-29 Enc82L Large Enclosure - ABB NGC8206 User Manual

15) Repeat steps 13 through 15 for the second screw.
INTERNAL
CONNECTION ASSY
FLEXABLE CABLE
16) Locate the support bracket mounting holes on the enclosure.
17) Place the split washer, then a flat washer on the end of each screw.
18) Insert the screw through the mounting bracket and into the hole on the side of the
enclosure.
19) Using a phillips point screwdriver, start the screw into the hole, but do not tighten.
20) Repeat steps 13 through 15 for the second screw.
21) Level the bracket and tighten the screws until snug.
22) Move the outlet box assembly down so that it rests on the mounting bracket (see
Figure
Page 3–30

Figure 3-29 ENC82L Large Enclosure

3-30).
OUTLET BOX ASSY
DC POWER SWITCH
2101510 Rev. AG