115/230 Vac Ups Power Supply (24 Vdc Systems); Figure 3-64 6800 Enclosure Wall Mounted Installation - ABB NGC8206 User Manual

Figure 3-64 6800 Enclosure Wall Mounted Installation

3.29.6.1
1) When the unit is received, unpack and inspect all components for evidence
2) Using instructions supplied with the mounting kit, attach the bracket to the back
of the enclosure unit.
3) Prepare the wall surface for mounting, and mount the enclosure to the wall.

3.30 115/230 VAC UPS Power Supply (24 VDC Systems)

Before beginning, review the procedure and the materials required for installation.
Page 3–60
(15.83")
MOUNTING
BRACKET
FLAT AND LOCK WASHER
WITH SCREW
Wall Mount Instructions
of damage. Report damage to the shipping carrier and to the ABB
Totalflow service department.
This power supply may be approved for classified hazardous
locations or potentially explosive atmospheres. Verify the
rating listed on the unit tag, and install per the referenced
control drawing. Be sure to follow the requirements of national
and local codes when installing the power supply.
Installation must be performed by person(s) qualified for the
type and area of installation, according to national and local
codes.
(.60")
(31.20")
(30.00)
2101510 Rev. AG