Huawei DP300 User Manual page 20

HUAWEI DP300 Desktop Presence
User Guide
l
l
Turning Off the Display
Tap
Stopping the Conferencing System
Tap
Restarting the Conferencing System
Tap
Powering Off the DP300
Tap the power button in the lower right corner of the display twice or turn the power switch on
the right panel to OFF.
Placing the DP300 in Sleep Mode
Tap
Press
Waking Up the DP300 from Sleep Mode
The DP300 wakes up from sleep mode once any operation is performed on it. For example, the
DP300 wakes up for start display, an operation on the touch panel, upgrade, presentation source
connection, a wake-up instruction from the network, power-on time specified, an incoming call,
an operation on the remote control, or access to the DP300 web interface.
Status Indicators
Depending on the DP300's status, the indicators may blink in different colors and at different
rates, as listed in
Touch buttons (listed in
to control the volume, microphone, mode, display, and conferencing system status.
Table 4-1 Status indicator description
When the Status Indicator
Is...
Power button
Issue 01 (2015-09-15)
If you are using the touchscreen and want to change to use the remote control, press any
key on the remote control and switch to the remote control operation screen as prompted.
If you are using the remote control and want to change to use the touchscreen, tap anywhere
on the screen and switch to the touchscreen as prompted.
in the lower right corner of the display and turn off the display as prompted.
in the lower right corner of the display and stop the conferencing system as prompted.
in the lower right corner of the display and restart the conferencing system as prompted.
in the lower right corner of the display and place the DP300 in sleep mode as prompted.
on the remote control, select Sleep, and confirm as prompted.
Table 4-1.
Table
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-2) reside in the lower right corner of the display, and are used
The DP300 Is...
4 Powering On the DP300
14