ABB AC31 Assembly And Operation Manual page 86

AC31 Adapters
Replacement devices: I/O modules > Replacement device 07DC92-AD
1.5.2.8.3 Technical details of the I/O channels as digital outputs
Data
Connections
Type of digital outputs
Reference potentials for the outputs
Supply voltage for the outputs
Electrical isolation
Output current (maximum value)
Demagnetization with inductive load
Switching frequency with ohmic load
Output voltage at signal 1
Output delay: 0 -> 1 or 1 -> 0
Maximum cable length:
-> Shielded
-> Unshielded
Fig. 54: Protective circuits inputs/outputs
86
For further information, please refer to the existing documentation
System description Advant Controller 31.
Due to the changed protective circuit on the inputs and outputs, the restrictions
concerning the input signal voltage described in the existing documentation no
longer apply.
If the channels are to be used as inputs, the respective outputs (high-side
switches) must be switched off.
3ADR010122, 8, en_US
Value
X2 / 1.0 to 1.7
X3 / 2.0 to 2.7
X5 / 3.0 to 3.7
X6 / 4.0 to 4.7
High-side switch
M (07DC92: ZP0, ZP1, ZP2 and ZP3)
L+ (07DC92: UP0, UP1, UP2 and UP3)
No (07DC92: Group against group, all groups
in relation to the rest of the device
X2 + X3 = 4 A, X5 + X6 = 4 A (07DC92: 4 A
per group)
Internally with a varistor (with other circuitry)
On request
X4 / L+ (typ. 24 V) -0.8 V
On request
1000 m
600 m
2018/09/24