Motorola SC 4812ET RF Hardware Installation Manual page 9

Remember! . . . Safety
depends on you!!
Ground the instrument
Do not operate in an explosive
atmosphere
Keep away from live circuits
Do not service or adjust alone
Do not substitute parts or
modify equipment
Apr 2001
SC
TM
V00.04
The following general safety precautions must be observed during all
phases of operation, service, and repair of the equipment described in
this manual. Failure to comply with these precautions or with specific
warnings elsewhere in this manual violates safety standards of design,
manufacture, and intended use of the equipment. Motorola, Inc. assumes
no liability for the customer's failure to comply with these requirements.
The safety precautions listed below represent warnings of certain dangers
of which we are aware. You, as the user of this product, should follow
these warnings and all other safety precautions necessary for the safe
operation of the equipment in your operating environment.
To minimize shock hazard, the equipment chassis and enclosure must be
connected to an electrical ground. The BTS must be connected to a
permanent terminal, and not via a plug to ensure a firm ground at all
times.
Do not operate the equipment in the presence of flammable gases or
fumes. Operation of any electrical equipment in such an environment
constitutes a definite safety hazard.
Operating personnel must:
S
not remove equipment covers. Only Factory Authorized Service
Personnel or other qualified maintenance personnel may remove
equipment covers for internal subassembly, or component
replacement, or any internal adjustment.
S
not replace components with power cable connected. Under certain
conditions, dangerous voltages may exist even with the power cable
removed.
S
always disconnect power and discharge circuits before touching them.
Do not attempt internal service or adjustment, unless another person,
capable of rendering first aid and resuscitation, is present.
Because of the danger of introducing additional hazards, do not install
substitute parts or perform any unauthorized modification of equipment.
Contact Motorola Warranty and Repair for service and repair to ensure
that safety features are maintained.
4812ET RF and Power Cabinet Hardware Installation Manual
DRAFT
General Safety
9