Motorola SC 4812ET RF Hardware Installation Manual page 63

Apr 2001
SC
TM
V03.03
Table 3-1:Unpacking a Cabinet (Wood Shipping Crate)
Step
5 Using appropriate lifting device, remove cabinet from bottom
pallet.
6 Immediately inspect the equipment for damage, (see
Table 3-3) and report the extent of any damage to the
transport company and to the appropriate
engineering/management personnel.
Cardboard Shipping Carton
Use Table 3-2 to properly unpack the RF and Power Cabinet if the
cardboard shipping carton was used.
Table 3-2:Unpacking a Cabinet (Cardboard Shipping Carton)
Step
1 Inspect the cartons for damage. (Refer to Figure 3-4).
NOTE
It is recommended that two (2) people perform this procedure.
2 Using tin snips, cut each outer steel band that surrounds the
carton.
3 Lift off cardboard carton.
4 Using appropriate lifting device, remove cabinet from bottom
pallet.
5 Immediately inspect the equipment for damage, (see
Figure 3-4) and report the extent of any damage to the
transport company and to the appropriate
engineering/management personnel.
4812ET RF and Power Cabinet Hardware Installation Manual
DRAFT
How to Unpack the SC 4812ET BTS
Action
Action
– continued
3
63