RRH
RFV01U-D2A
After Installing
After installation, remove any debris produced during the work and clean up the
installation site.
In the system, the laser beam light runs through the optical cable. Handle the
optical cables with care as the laser beam can seriously damage the worker's eyes.
Make sure that worker does not damage installed cables while cleaning the system.
While cleaning the power supply device, take caution that the device is not
exposed to foreign objects that may cause power failure.
RFV01U-D2A Installation Manual v2.0
Copyright © 2017, All Rights Reserved.
Chapter 1 Before Installation
Safe Distance
1000 cm
Confidential
7