Anchor Bolt Drill Bits And Hole Depth; Figure 43. Drilling And Anchoring - Samsung RFV01U-D2A Installation Manual

Category
Table 13. Anchor Bolt Drill Bits and Hole Depth
Category
RRH (Wall Type)
[Anchor Hole Cross Section]
[O]
1.73 in.
(44 mm)
* Remove the debris from the drilled hole.
2
3
Figure 43. Drilling and Anchoring
0.55 in.
(14 mm)
When fixing the mounting bracket_front or 2 sector mounting bracket
assembly_front on the wall, 'A' side should stick on the wall.
RFV01U-D2A Installation Manual v2.0
Copyright © 2017, All Rights Reserved.
Description
 Concrete Drill Bit [0.55 in. (14 mm)]
 Vacuum Cleaner
 Hammer
 Anchor Punch (For M10 Strong Anchor)
Anchor Bolt
M10
[X]
Drill anchor holes at the marked points and remove all the drilling dust from
the holes using a cleaner.
Fix strong anchor to the drilled hole.
Vacuum Cleaner
Hammer Drill
Chapter 2 Installing System
Drill Bits
0.55 in. (14 mm)
Confidential
Hole Depth
1.73 in. (44 mm)
0.55 in.
(14 mm)
M10 Strong Anchor
Anchor Punch
Hammer
43