Table of Contents
Advertisement
2.7 Connecting Hybrid cable
2.7.1 Installing Hybrid cable
Follow the steps below to install the hybrid cable.
1) Unpack the box. (A-D)
2) Pull up the tower. (E-F)
A) Use a crowbar to open the wooden box cover.
After opening the cover, ensure to remove the remaining nails as they may cause injury.
Crowbar
B) Hold both ends of the hybrid cable and lift it out of the box. Tape the power cable and optic cable
separately at 1 m interval. Also, tape the exposed optic connector to prevent damage.
© SAMSUNG Electronics Co., Ltd.
Figure 2.13 Installing Hybrid cable (1)
Smart MBS RRH-P4 Installation Manual/Ver.2.0
...
1 m
1 m
Cover
Wooden Box
Tape
2-19
Advertisement
Table of Contents
