Table of Contents
Advertisement
SRU
RFV01U-D1A
After Installing
Remove any debris produced during the work and clean up the installation site.
In the system, the laser beam light runs through the optical cable. Handle the
optical cables with care as the laser beam can seriously damage the worker's eyes.
Make sure that worker does not damage installed cables while cleaning the system.
While cleaning the power supply device, take caution that the device does not
come in contact with foreign objects that may cause power failure.
RFV01U-D1A Installation Manual v2.0
Copyright © 2017, All Rights Reserved.
Chapter 1 Before Installation
Safe Distance
1510 cm
Confidential
6
Advertisement
Table of Contents
