Transporting And Unpacking; Bringing In Items; Unpacking Items - Samsung RFV01U-D2A Installation Manual

Transporting and Unpacking

This section describes the procedure to unpack cabinets and other components and
to transport them to the installation place.

Bringing in Items

Bring in items, taking care of the followings:




Unpacking Items

To unpack the items, ensure the following:






RFV01U-D2A Installation Manual v2.0
Copyright © 2017, All Rights Reserved.
When carrying a system:
o Fasten the system firmly to the transport vehicle or carrier to prevent
damage to the system for a vibration or shock.
o Use a lift to prevent accidents. However, if the system must be carried by
people, enough people are required to carry the system.
Before moving the system, check the storage place for the system and remove
obstacles in advance.
While moving the system, the system should not be shocked physically and
damaged caused by dust, moisture, and static electricity.
The items must be packed until they reach the installation place.
The items are classified in accordance with each job specification and stored
on a place that does not interfere with working.
Unpacked systems must be installed immediately. If not installed, the systems
must be stored in the installation place temporarily.
Unpack only external packing, leaving the internal packing in unpacked status.
Unpack the inner packaging after each system is placed on its installation
location.
Scrap by-products (packaging waste) in accordance with the rule. Do not
recycle the by-products.
Confidential
Chapter 2 Installing System
18