Fixing Mounting Bracket Assembly_2 Sector Pole Type (Side Installation 3); Fixing Rrh_1 Sector Pole Type (Standard And Side Installation) - Samsung RFV01U-D2A Installation Manual

4
Figure 33. Fixing Mounting Bracket Assembly_2 Sector Pole Type (Side Installation 3)
Extension Mounting Bracket
Hook Groove
Fixing RRH
For 1 Sector
To fix the RRH_1 sector pole type for standard and side installation, do the
following:
1
Table 9. Fixing RRH_1 Sector Pole Type (Standard and Side Installation)
Category
Parts
Recommended Torque Value
Working Tools
2
RFV01U-D2A Installation Manual v2.0
Copyright © 2017, All Rights Reserved.
Fit the groove of the extension mounting bracket into the left hook of the
mounting bracket_front, and then fix it using fasteners.
Mounting Bracket
_Front Hook
Make sure you have the following items:
Description
M10 × 35L Hex. Bolt (washer assembly,
attached to the unit bracket)
M10 Hex. Bolt
 Torque Wrench (100 to 400 lbf·in)
 Torque Wrench Spanner head (apply Hex. Head: 17 mm)
 Spanner (17 mm)
Hang the unit bracket hook of RRH side on the groove of the mounting
bracket_front hook, and then fix it using fasteners.
Confidential
Chapter 2 Installing System
M10 Hex. Bolt
(washer assembly)
1 EA
217 lbfin (250 kgf·cm)
34