Table of Contents
Advertisement
When fixing the mounting bracket, the specification of pole should be from 50 A
(2.38 in./60.5 mm) to 100 A (4.5 in./114.3 mm) and the specification of carriage
bolt should be M10 × 220L.
When fixing pole, fix it using the outside hole of mounting bracket_front.
2
Figure 23. Assembling Mounting Bracket (1)
3
4
RFV01U-D2A Installation Manual v2.0
Copyright © 2017, All Rights Reserved.
Outside holes
Insert carriage bolts to the outside hole of mounting bracket_front.
Mounting Bracket_Front
M10 Carriage Bolt
Pass the carriage bolt through the side-closed hole of the mounting
bracket_rear and then fix the fastening material.
Fasten the other carriage bolt to the mounting bracket_front only.
Confidential
Chapter 2 Installing System
Inside holes
27
Hide quick links:
Advertisement
Table of Contents
