Replacing The Ps Converter And Second Flyeye; Replacing The Optional Board - Sony SRX-R320 Service Manual

1-10. Replacing the PS Converter and Second Flyeye

1. Remove the panel (U7) block assembly. (Refer to Section 1-3-2.)
2. Remove the panel (U2) block assembly. (Refer to Section 1-3-3.)
3. Open the panel duct block assembly. (Refer to steps 3 and 4 in Section 1-4-3.)
4. Remove the four screws, then remove the unit cover (B).
5. Remove the PS converter from LRD-001.
6. Remove the second fl yeye from LRD-001.
7. To install, reverse the removal procedure.
n
When attaching the PS converter and the second
fl yeye, place them with the markings located on the
downside as shown in the fi gure.

1-11. Replacing the Optional Board

For replacing the optional board in INPUT A/B slot, refer to Section 1 in Installation Manual.
1-56 (E)
PS converter Second flyeye
Marking (black) Marking (red)
LRD-001
PS converter
Fig. 1-10
Unit cover (B)
PSW
3 x 12
Second flyeye
SRX-R320