Serial Number, Operation Timer, Lamp Timer, And Filter Timer Data Writing - Sony SRX-R320 Service Manual

Procedure after version upgrade
1. Start the MAINTENANCE window of SRX Controller. (Refer to Section 2 in Installation Manual.)
2. Click the [VERSION] button of "VERSION INFORMATION" menu.
3. Check that the version is upgraded.
2-8. Serial Number, Operation Timer, Lamp Timer, and Filter Timer Data
Writing
n
In case that the adjustment in Section 2-6. cannot be performed normally when replacing the SY-378
board or IC1002 to IC1004 on the SY-378 board, perform the writing of the serial number, Operation
Timer, Lamp Timer, and Filter Timer data according to the procedure in this section. When the adjustment
in Section 2-6. is performed normally, the adjustment in this section is not required.
Required equipment
. SerialLoader.exe
. Filter Timer setting tool
n
For using of the Filter Timer setting tool, refer to the documentation supplied with the tool.
. PC (Refer to Section 2-1.)
. RS-232C cable or Ethernet cable
2-12 (E)
Fig. 2-7g
SRX-R320